Memory Card Phone
microSD Speed Class: Class10
Power supply voltage: 2.7 ~ 3.6V (max)
Compatible standards:microSD memory card Ver.3.00/Ver.2.00 standard
Exterior dimensions: 15.0mm (L) * 11.0mm (W) * 1.0mm (T)
Weight: About 0.4g
Please insert microSDXC and support microSDHC microSD card slot to use.
Support high speed SD bus interface specifications (*) in the new UHS-I. Only with the support of UHS-I devices used in UHS-I mode. (see below)
The temperature of -25 to 85 DEG C, relative humidity 30 ~ 80%RH (no condensation)
SanDisk Micro SD with Retail Package*1
16GB/32GB –Class 10-microSDHC A1,Max Rread speed to 98MB/s
64GB/128GB –Class 10-microSDXC A1,Max Rread speed to 100MB/s
8GB= approximately 7.2GB~7.4GB
*This is calculation difference between manufacturer and our PC, please Google ‘Memory card capacity’ to get more information
Please use quaity card reader to verify all memory card by H2testw on PC
Please don’t use cheap card reader to test Micro SD card, speed of Micro SD card will be reduced by low quality card reader
The most reliable software to verify memory card is H2testw
*1 According to SanDisk’s test based on IPX7 standard, the product can function, after it is submerged quietly and left for 30minutes in static tap water at room temperature and in depth of 1m and then it is taken out of the water. Caution remarks on “waterproof”.
– If liquid is applied on (touches) the card, remove the liquid by soft cloth immediately.
– The waterproof is based on our internal testing, and does not guarantee usage under “all/any” conditions. Please be aware.
*2 ISO7816-1 compliant means, that even after exposing this product to X-ray 0.1Gy, the product will still work.
*3 The Product is labeled based on the memory chip (s) it contains, not the amount of memory capacity available for data storage by the end user. Part of the capacity is reserved for card functionality.
Approximate usable capacity is based on 1 GB = 1,073,741,824 bytes.
*4: 1 MB per second is calculated as 1,000,000 bytes per second.
*5: For products incompatible with UHS-I interface, the speeds may vary subject to different interface conditions* Write speed is slower than transfer speed.
*6: Indicates reading and writing speeds based on SD Association specifications.